Carbon Fibre Rods,Tubes, Strips & Glass Fibre Cloth

Woven Glass Fibre Cloth



Glass Fibre Cloth 25g/m² Width 100 cm

Length 1m (4.00)
Length 2m (7.60)
Length 3m (10.80)
Length 5m (17.00)



ULTRA LIGHTWEIGHT (CLOSE WEAVE)

Woven Glass Cloth suitable for surface finishing on model aircraft wings, fuselage & model boats. Resin consumption: 20g/m² laminate thickness: 0.027 mm, laminate weight: 45 g/m²




Qty    
Glass Fibre Cloth 25g/m Width 110 cm


Length 1m (8.00)
Length 2m (15.20)
Length 3m (21.60)
Length 5m (34.00)


Length 20m supplied on a roll (£144.00)

ULTRA LIGHTWEIGHT (CLOSE WEAVE)

Specialized Coated Material for ultimate strength, finish and ease of use. Superior glass finishing properties.

Woven Glass Cloth suitable for surface finishing on model aircraft wings, fuselage & model boats. Resin consumption: 20g/m laminate thickness: 0.027 mm, laminate weight: 45 g/m




Qty
   

Glass Fibre Cloth 49g/m² Width 100 cm

Length 1m (4.00)
Length 2m (7.60)
Length 3m (10.80)
Length 5m (17.00)



SUPER LIGHTWEIGHT (CLOSE WEAVE)

Woven Glass Cloth suitable for surface finishing on model aircraft wings, fuselage & model boats. Resin consumption: 39g/m² laminate thickness: 0.054 mm, laminate weight: 88g/m²




Qty    
Glass Fibre Cloth 49g/m Width 110 cm


Length 1m (8.00)
Length 2m (15.20)
Length 3m (21.60)
Length 5m (34.00)

Length 20m supplied on a roll (£144.00)

SUPER LIGHTWEIGHT (CLOSE WEAVE)


Specialized Coated Material for ultimate strength, finish and ease of use. Superior glass finishing properties.

Woven Glass Cloth suitable for surface finishing on model aircraft wings, fuselage & model boats. Resin consumption: 39g/m laminate thickness: 0.054 mm, laminate weight: 88g/m


Qty    

Glass Fibre Cloth 80g/m Width 100 cm

 

LIGHTWEIGHT (CLOSE WEAVE)


Length 2m 7.50
Length 3m 10.50
Length 5m 16.25


Woven Glass Cloth suitable for heavy duty wing covering



Qty    

1m x 1m £8.50
1m x 2m £15.00

Glass Fibre Cloth 163g/m²

TWILL WEAVE

Suitable for moulding model aircraft fuselages. Resin Consumption 128g/m² Laminate thickness 0.179mm weight 291g/m²



Qty    

Woven Glass Tape (135g/m² ) 4metres

PLAIN WEAVE

Glass reinforcing tape

Ideal for joining model aircraft wings,
laying up boat hulls, moulds etc.


Width 1" / 25mm £1.25 for 4metres
Width 2" / 50mm £1.50 for 4metres
Width 3" / 75mm £2.00 for 4metres
Width 4" / 100mm £2.75 for 4metres
Width 6" / 150mm £3.80 for 4metres



Qty    

Woven Glass Tape (135g/m² )

PLAIN WEAVE

Glass reinforcing tape

Ideal for joining model aircraft wings,
laying up boat hulls, moulds etc.

Width 1" / 25mm £3.50 for 50 metre roll
Width 2" / 50mm £4.00 for 50 metre roll
Width 3" / 75mm £4.50 for 50
metre roll
Width 4" / 100mm £15.00 for 100 metre roll

 

For use with resin



Qty    

Carbon Fibre Woven Tape 195g/m

Plain weave
Carbon 3k warp & weft
Perfect for reinforcing


Width 1" / 25mm
Thickness 0.25mm

1 metre pack 3.50
2 metres pack 6.50
5 metres pack 15.50

50 metre roll £135



Qty    

Carbon Fibre Woven Tape 195g/m

Plain weave
Carbon 3k warp & weft
Perfect for reinforcing


Width 2" / 50mm
Thickness 0.25mm

1 metre pack £4.50
2 metres pack 8.50
5 metres pack 19.50

50 metre roll £175



Qty    

Carbon Fibre Woven Tape 195g/m

Plain weave
Carbon 3k warp & weft
Perfect for reinforcing


Width 3" / 75mm
Thickness 0.25mm

1 metre pack 5.50
2 metres pack 10.50
5 metres pack 25.75

50 metre roll £237.50



Qty    

Carbon Fibre Woven Tape 195g/m

Plain weave
Carbon 3k warp & weft
Perfect for reinforcing


Width 4" / 100mm
Thickness 0.25mm

1 metre pack 6.50
2 metres pack 12.50
5 metres pack 30.50

64 metre roll £364.80



Qty    

 

Carbon Fibre Woven Tape 195g/m

Plain weave
Carbon 3k warp & weft
Perfect for reinforcing


Width 5" / 125mm
Thickness 0.25mm

1 metre pack 7.50
2 metres pack 14.50
5 metres pack 35.75

50 metre roll £355.50



Qty    

Carbon Fibre Woven Tape 204g/m

Twill Weave
Perfect for reinforcing


Width 35mm
Thickness 0.30mm

1 metre pack 5.00
2 metres pack 9.00
5 metres pack 21.00



Qty    

Carbon Fibre Woven Tape 204g/m

Twill Weave
Perfect for reinforcing


Width 50mm
Thickness 0.30mm

1 metre pack 5.50
2 metres pack 9.50
5 metres pack 22.00



Qty    

Carbon Fibre Kevlar Hybrid Woven Tape 100g/m

Plain weave (Fine weave)

MATERIAL WARP CARBON 1K
WEFT KEVLAR 49


Perfect for reinforcing seams on Glass fibre mouldings where a high strength joint is required.

For example model fuselage joining, model boat hulls joining, reinforcing balsa, plywood etc



Width 1" / 25mm
Thickness 0.15mm

1 metre pack 4.50
2 metre pack 8.50
5 metre pack 19.50
50 metre roll 175.00



Qty    

Carbon Fibre Kevlar Hybrid Woven Tape 100g/m

Plain weave (Fine weave)

MATERIAL WARP CARBON 1K
WEFT KEVLAR 49


Perfect for reinforcing seams on Glass fibre mouldings where a high strength joint is required.

For example model fuselage joining, model boat hulls joining, reinforcing balsa, plywood etc



Width 2" / 50mm
Thickness 0.15mm

1 metre pack 6.50
2 metre pack 12.50
5 metre pack 30.50
50 metre roll 285.00



Qty    

Kevlar Woven Tape 180g/m

Twill weave

Reinforcements and wound components with high tensile strength, impact strength, wear resistance, and high energy absorption capacity.
Ideal for reinforcing the inside of model fuselage and boat hulls to
prevent damage when under stress.

.

Width 2" / 50mm
Thickness 0.25mm

1 metre pack 2.95
2 metre pack 5.80
5 metre pack 14.25
50 metre roll 140
100 metre roll 275



Qty    

Carbon Fibre Tows (12K ) £3.95 for 10metres

Supplied on a roll
Ideal for local reinforcing, Balsa wood, Spars, etc. can be applied with epoxy resin or Cyano.

 

Qty    

Carbon roving HTA 67 tex (1K)
325 for 7462metre (500g) coil

Roving of high tensile modulus carbon fibre
Density: 1,77 g/cm
Tensile strength: 3950 MPa
Tensile modulus: 238 GPa
Elongation at break: 1,7 %
Filament count: 1000 = 1K
Filament diameter: 7 m

Application:
For components with good rigidity and strength
For hand lay-ups, winding, and pultrusion
Fast and good impregnation
For epoxy, polyester, and vinyl ester resins

325 for 7462metre (500g) coil



Qty    

Carbon roving HTS 1600 Tex (24K)
225 for 1242metre coil


Density: 1,77 g/cm
Tensile strength: 4300 MPa
Tensile modulus: 240 GPa
Elongation at break: 1,8 %
Filament count: 24000 = 24 K
Filament diameter: 7 m
Roving of high tensile modulus carbon fibre

Application:
For components with good rigidity and strength
For hand lay-ups, winding, and pultrusion
Fast and good impregnation
For epoxy, polyester, and vinyl ester resins

225 for 1242metre coil



Qty    

Aramid Rovings
1.75 for 10metres

Supplied on a roll



Qty    

 

Aramid Roving 805 Tex
495 for 6650metre coil


Weight 0.805 g/m
For hand lay-ups, winding, and pultrusion
Fast and good impregnation
For epoxy, polyester, and vinyl ester resins
Density: approx. 1,45 g/cm
Tensile strength: approx. 2880 MPa
Tensile modulus: approx. 100 GPa
Elongation at break 2,8 %
Roving of Aramid HM

495 for 6650metre coil



Qty    

Kevlar Thread - See sizes & prices below

 

0.10mm diameter 5.75 for 50 metre bobbin

0.10mm diameter 100.00 for 5000 metre bobbin

 

0.20mm diameter 6.80 for 40 metre bobbin
0.20mm diameter 125.00 for 3000 metre bobbin

Very strong, ideal for whipping, close loop etc. on model aircraft.

This thread is 5 times stronger than steel thread and does not melt even when heated up to 4250C continuously. Kevlar reacts with UV light which will decrease in strength over time but does not affect its fire/temperature resistance. 50% loss of strength to an estimated 50 to 60 weeks of exposure to UV-rays.

I will supply the reel in a black bag to keep out UV-rays when posting to you.

 



Qty    

Carbon Fibre Hose 18mm
4mm to 22mm Diameter
Thickness 0.5mm
Technical Data at 45 braid angle:
Diameter 17.8mm
Width flat 28.0mm
Weight 18.1g/m

 




Qty    

Carbon Fibre Hose 35mm
12mm to 40mm Diameter
Thickness 0.39mm
Technical Data at 45 braid angle:
Diameter 34.4mm
Width flat 54.0mm
Weight 27.2g/m

 



Qty    

Carbon Fibre Hose 60mm
20mm to 70mm Diameter
Thickness 0.27mm
Technical Data at 45 braid angle:
Diameter 62.4mm
Width flat 98.0mm
Weight 40.7g/m

 



Qty    

Peel Ply Plain Weave 100mm (4") Wide x 4mts length (£3.75)

This is used to give an overall rough, bondable upper surface free from release agent film once the resin has cured.

Process procedure: Lay on laminate leave laminate to cure, then remove the Peel Ply.

Qty    

Glass fibre reinforced self-adhesive tape

For use on EPP model aircraft for covering the model.

Very strong and resilient.

Not suitable for use with resin.


25mm (1") Width 4.50 for a 50 metre roll
50mm (2") Width 7.50 for a 50 metre roll

 



Qty    

Home | Materials | Resin & Additives | Strips | Rods | Tubes | Half Round D Section | Sheet | Tools | Gallery | Contact | Top
© Copyright Fibretech GB , all rights reserved.